One would expect that the markings M+S, or Mud and Snow, on a tire would mean that it was designed for proper winter traction in all conditions.
You might be surprised to find that it only defines a tire whose treads:
鈥� Have multiple pockets or slots in at least one tread edge that extend toward the tread centre at least 1/2 inch from the footprint edge;
鈥� Measured perpendicularly to the tread centreline, have a minimum cross-sectional width of 1/16 inch;
鈥� Have edges of pockets or slots at angles between 35 and 90 degrees from the direction of travel;
鈥� Have a contact surface void area will be a minimum of 25 per cent based on mold dimensions.
It says nothing about the tire鈥檚 rubber compound and its ability to stick to compact snow and ice. In fact, at temperatures below 7 C., it can be expected to perform just like a summer tire in these conditions.
If you are like most tire-buyers, my guess is that you choose an all-season tire based on the manufacturer鈥檚 mileage durability claims.
This means a rubber compound that stays hard and does a poorer job of sticking to compact snow and ice.
Tires with the mountain and snowflake design are rated for their ability to provide traction in winter conditions where the temperature is below 7 C. Think of them as low-temperature tires and choose them over all-season tires when you drive in B.C.鈥檚 winter road environment.
For more information on this topic, visit www.drivesmartbc.ca. Questions or comments are welcome by e-mail to comments@drivesmartbc.ca.
Tim Schewe is a retired RCMP constable with many years of traffic law enforcement experience. His column appears Friday.
